Niveo Professional NWAR33P - Manual (Page 36)

36
3 . Please enter all the information in the blanks provided and then click continue .
4. The device will reboot and then load the new configuration.
5. If all information provided is valid and the device successfully connects to WAN, a dialog box
will appear to signify the completion of the WAN port setup. At this point you can either click
Done to finish the EZSO configuration or you can click Next to wireless to proceed to the
wireless configuration if you have.
6. However, if any error occurs during device configuration that results in WAN connection failure,
the system will prompt that the set up has failed.