Niveo Professional NWAR33P - Manual (Page 73)

73
IPv6 Autoconfiguration
Parameters--Static LAN IPv6 Address Configuration
LAN IPv6 Address: Here shows the IPv6 Address.
Interface Address/ Prefix Length: Enter the IPv6 WAN IP Address and the Prefix Length.
IPv6 LAN Applications
DHCPv6 Server: Click "Enable" to activate DHCPv6 Server function.
DHCPv6 Server Type: Two Server types to be selected: Stateful Auto-configuration and
Stateless Auto-configuration. With Stateless auto-configuration, IPv6 hosts can configure
themselves automatically when connected to a routed IPv6 network. If IPv6 stateless address
autoconfiguration is unsuitable for an application, a network may use stateful configuration with
DHCPv6. Click "Stateful" so that you can set the start and end interface ID.
Start Interface ID: Enter the Start Interface ID
End Interface ID: Enter the End interface ID
Leased Time(hour): Default leased time is one day(24 hours).
Issue Router Advertisements: Click to enable this function.