Niveo Professional NWAR33P - Manual (Page 140)

140
Device Management
The D evice Management advanced configuration settings allow you to control your router‟s
security options and device monitoring features.
Device Host Name
Host Name: Assign it a name.
Note: The Host Name must have more than a word. These two words should be connected
with a „.‟ period inbetween.
Example:
Host Name: homegateway ==> Incorrect
Host Name: home.gateway or my.home.gateway ==> Correct)
Embedded Web Server
HTTP Port: This is the port number that the router embedded web server (for web-based
configuration) will use. The default value is the standard HTTP port 80. Users may specify an
alternative if, for example, they are running a web server on a PC within their LAN.
Management IP Address: You may specify an IP address for logon and access the router web
server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to
login from any IP address.
Expire to auto-logout: Specify a duration for the system to log the user out of the configuration
session automatically.
For Example:
User A changes the HTTP port number to 100, specifies their own IP address as 192.168.1.55
and sets the logout time as 100 seconds. The router will only allow User A to access the Web
GUI from the IP address 192.168.1.55 by typing http://192.168.1.254:100 in their web browser.
Nevertheless, after 100 seconds the device will automatically log User A out of the system.