Nortec MH Series - Manual (Page 19)

Installation | 16
Step 2 – Side Panels
Step 3 – Top Bracket and
Intermediate Members
Air
Flow
Side panels
Air
Flow
Intermediate
members
Top Bracket
 Install side panels onto
the drain pan using 1/4
UNC x 3/4 in. screws,
washers, and ¼” UNC
locknuts.
 Ensure flanges for
mounting media boxes
are upstream with
respect to airflow.
Figure 14: Side Panel Assembly
 Install top bracket and
intermediate members
to side panels and
drain pan using 1/4
UNC x 3/4 in. screws,
washers, and ¼” UNC
locknuts.
 Tighten screws finger
tight for ease of
assembly, tighten
completely in step4.
Figure 15: Top Bracket /and
Intermediate Member assembly