Quantum Composers 9530 Series - Manual (Page 36)

Page 36 9530/8530 Manual Version 4.8
:PULSE0:MODE SING <cr> <lf> sets system mode to single shot
:PULSE:TRIG:MODE TRIG <cr> <lf> sets system to external trigger
:PULS:TRIG:LEV 2.5 <cr> <lf> sets trigger level to 2.5 volts
:PULS:TRIG:EDGE RIS <cr> <lf> set to trigger on rising edge
To arm the instrument in external gate mode, use either of the following commands:
:PULSE0:STATE ON <cr> <lf> Arms the instrument
:INST:STATE ON <cr> <lf> Alternate form if T
0
is currently
selected.
A software generated external trigger can be generated by using the following command:
*TRG <cr> <lf> Generates a software external trigger