Quantum Composers 9530 Series - Manual (Page 44)

Page 44 9530/8530 Manual Version 4.8
GATE INPUT
MODE
Pulse inhibit or output inhibit
POLARITY Active high/active low
MODULE SPECIFICATIONS
TTL/ADJUSTABLE DUAL CHANNEL OUTPUT MODULE (Standard)
OUTPUT IMPEDANCE 50 ohm
TTL/CMOS MODE
OUTPUT LEVEL 4.0 V typ into 1 kohm
RISE TIME 3 ns typ (10% - 90%)
SLEW RAT > 0.5 V/ns
JITTER 50 ps RMS channel to channel
ADJUSTABLE MODE
OUTPUT LEVEL 2.0 to 20 VDC into 1 k ohm
1.0 to 10.0 VDC into 50 ohm
OUTPUT RESOLUTION 10 mV
CURRENT 200 mA typical, 400 mA (short pulses)
RISE TIME 15 ns typ @ 20 V (high imp)
25 ns typ @ 10 V (50 ohms)
(10% - 90%)
SLEW RATE >0.1 V/ns
OVERSHOOT <100 mV + 10% of pulse amplitude
TRIGGER/GATE DUAL INPUT MODULE (Standard)
Standard dual channel input module, providing one trigger input and one gate input. May
be used with the dual trigger firmware option to provide two independent trigger sources.
THRESHOLD 0.2 to 15 VDC
MAXIMUM INPUT VOLT. 60 V Peak
IMPEDANCE 1.5 K ohm + 40pF
RESOLUTION 10 mV
TRIGGER INPUT
SLOPE Rising or Falling
JITTER 800 ps RMS
INSERTION DELAY <180 ns
MINIMUM PULSE WIDTH 2 ns