Quantum Composers 9530 Series - Manual (Page 56)

Page 56 9530/8530 Manual Version 4.8
Mode: Disabled
Change Trigger Mode
Mode: Triggered
Level: 2.50 Volts
Edge: Rising/Falling Edge Mode: Dual Trig
Level: 2.50 Volts
Edge: Rising/Falling Edge
Gate Menu
When the Dual Trigger option is evoked under the Trigger menu the Gate menu changes to allow
the user to only change the level and edge parameters.
Mode: Dual Trig.
Level: 2.50 Volts
Edge: Rising/Falling Edge
13. Appendix F
– Impedance Matching
Outputs
TZ50 Impedance Matching Output Module
This module option allows a user to have a 50 Ω load on the output while maintaining output
amplitude of at least 4 Volts while in the TTL/CMOS mode. All other functionality of the module is
the same as the AT20 modules, including output while using the Adjustable Mode Function of the
channels.
TTL/ADJUSTABLE OUTPUTS
TTL/CMOS Mode
Output Level 4.0 Volts typical into 50 Ω
Rise Time 3 ns
Slew Rate >0.5 V/ns
Jitter – Channel to Channel <50 ps RMS
Adjustable Mode
Output Resolution 10 mV
Current 200 mA typical, 400 mA max (short pulses)
Slew Rate >0.1 V/ns
*Note: The TZ50 module has significant overshoot and ringing through high
impedance (see figure).