Ieee 488.2 common commands, Hanges in, Tructure – Quantum Composers 9530 Series User Manual
Page 55: Aused by, Nabling the, Rigger, Unction, Counter menu, Channel advanced menu, Trigger menu
9530/8530 Manual Version 4.8
Page 55
:CTRIGger
GATE/TRIG
Sets which input is assigned to the channel
trigger
IEEE 488.2 Common Commands
Command:
Parameter Range:
Notes:
*TTG
Trigger-Trigger Input
Generates a software trigger pulse for the TRIG input only. Operation is
the same a receiving an external trigger pulse.
*GTG
Trigger-Gate Input
Generates a software trigger pulse for the GATE input only. Operation is
the same a receiving an external trigger pulse.
Changes in Menu Structure Caused by Enabling the Dual Trigger Function
Counter Menu
The counter Menu now shows the option to track the counter counts on the Gate input when
functioning as a trigger.
Enable/Disable Counter
T Counts:
G Counts:
Zero the Counter
Channel Advanced Menu
The Channel Advanced menu now shows that the gate is used in the dual trigger mode and only
lets the user select to enable/disable the channel and choose which trigger source to use for that
channel.
Ch: -HGFE DCBA-
Mux: -0000 0001-
Enable/Disable Channel
Ch Gate: Dual Trig
Trig Src: Trig
Ch: -HGFE DCBA-
Mux: -0000 0001-
Enable/Disable Channel
Ch Gate: Dual Trig
Trig Src: Gate
P
re
ss
th
e
P
ag
e
B
u
tto
n
Trigger Menu
The Trigger menu now has a third mode selection, Dual Trigger.