Quintum Technologies Call Routing Server - Manual (Page 10)

P/N 480-0028-00-00 1-7
Chapter 1: Overview
How to use this product guide
What’s included?
This product guide is divided into chapters; each chapter describes a specific topic. The following chapters are
included:
• Chapter 1: Overview: Includes a general overview of the product, including a description of how our
products fit into the VoIP network.
• Chapter 2: Hardware Installation. Lists and describes all components, including all hardware and
cables. Describes how to install the product, including power and ethernet connections.
• Chapter 3:Using the LCD Front Panel/Setting IP Address. Describes how to use the LCD front panel to
configure an IP address.
• Chapter 4: Getting Started via Quintum Routing Server Manager. Describes how to access the Quintum
Routing Server Manager for configuration.
• Chapter 5: Configure via Command Line Interface (CLI). Describes the CLI and how to configure the
Routing Server.
Product Guide Conventions
Certain typographical conventions are used throughout this product guide. See below.
• All commands you enter via keystrokes appear in bold (e.g., Press Enter or Press Ctrl-I).
• All text commands you enter via Telnet session or command line typing appear in italics (e.g., type
active).
• There are three types of special text that are designed to reveal supplemental information: Note, Warn-
ing, and Caution. See below.
NOTE provides additional, helpful information. This information may tell you how to do a certain task
or just be a reminder for how-to’s given in previous sections.
A WARNING provides information about how to avoid harm to your VoIP equipment or other equip-
ment (i.e., Do not stack more than 4 units together).
A CAUTION provides information about how to avoid injury to yourself or to others (i.e., Do not install
the equipment during a lightning storm).