Quintum Technologies Call Routing Server - Manual (Page 29)

P/N 480-0028-00-00 4-3
Chapter 4: Getting Started via Quintum Routing Server Manager
Login Quintum Routing Server Manager
After installing the Quintum Routing Server Manager software, you are ready to login and get started with the
Routing Server.
1. Access the Quintum Routing Server Manager menu item (located in the area in which you specified during
installation). For example, click on Start > Programs >Quintum Routing Server Manager>RoutingConfig.
The Specify Routing Server IP Address window will be displayed.
2. Enter the Routing Server IP address of the Call Routing Server in which you would like to configure.
3. Enter the Routing Server Port, 8080. The Specify Login and Password screen will be displayed.
4. Enter login and password (default entries: admin). Click on OK. The Quintum Routing Server Manager
will open.
You are now ready to configure a Quintum Routing Server. See the rest of this chapter for more information
about moving around the manager, using screens, etc. To learn how to configure the unit, see Configure
Screens, later in this chapter.