Quintum Technologies Call Routing Server User Manual
Page 45
P/N 480-0028-00-00
5-8
Chapter 5: Configure via Command Line Interface (CLI)
restore
ping
Description:
Restores the backup file you created using the backup command.
Cmd Type:
Command.
Prompt Level:
Main Routing Server prompt.
Syntax:
restore {filename}
Availability:
All Releases of Tenor Routing Server
Guidelines:
Before issuing a restore command, you must ensure the latest backup file is
stored in the backup directory with the original filename (i.e., /backup/db.mon-
day.enc).
The backup file will be restored to the same directory in which the file was cre-
ated (i.e., \backup\db.monday.enc) Upon successful restore, a message will be
displayed.
Examples:
Routing Server> restore db.monday.enc -
restores the backup file named db.mon-
day.enc.
Description:
Ping Command. Used to perform a standard ping test between the Tenor Rout-
ing Server and the IP host at the specified IP address.
Cmd Type:
Command.
Prompt Level:
Main Routing Server prompt.
Syntax:
ping {ipaddress}
Availability:
All Releases of Tenor Routing Server
Guidelines:
Very useful for testing the IP route between 2 locations.
Examples:
Routing Server> ping 192.168.1.1 -
pings the specified IP address.
Sample Display:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 seq=0 time<10mS TTL=255
Reply from 192.168.1.1: bytes=32 seq=1 time<10mS TTL=255
Reply from 192.168.1.1: bytes=32 seq=2 time<10mS TTL=255
Reply from 192.168.1.1: bytes=32 seq=3 time<10mS TTL=255
---- PING Statistics for 192.168.1.1: ----
Packets Sent = 4, Received = 4, Lost = 0 (0 Percent Loss)
Approximate round trip times in milli-seconds:
Minimum = 0mS, Maximum = 0mS, Average = 0mS