Quintum Technologies Call Routing Server - Manual (Page 5)

1-2 P/N 480-0028-00-00
Chapter 1: Overview
What is the Tenor Call Routing Server?
The Tenor Call Routing Server provides CLEC’s, ISPs, and generation service providers with scalable central-
ized network routing, policy enforcement, and management. The Tenor Call Routing Server provides a bridge
between PSTN circuits and VoIP networks as it supports traditional VoIP call routing and PSTN circuit
switching.
The high-capacity Tenor Call Routing Server supports 720K busy hour call attempts, as well as a 100,000
route call capacity. Each Call Routing Server can manage networks up to 24,000 voice ports, while providing
enhanced network-wide routing flexibility, such as QoS-based routing, least-cost routing, and source-based
routing. In addition, the server compiles work routing statistics and generates network reports, as well as CDR
(Call Detail Record) data.
Figure 1-1 Tenor Call Routing Server
The Tenor Call Routing Server is managed by an integrated web-based management system, the Quintum
Routing Server Manager. Through this software, you can configure routing specifications which will be used
through the voice network, as well as configure options such as ingress/egress groups, endpoints, and test
route cases. In addition, you can view custom or pre-defined reports.
LAN 1 LAN 2 10101
ESC ENTER