Quintum Technologies Call Routing Server - Manual (Page 53)

P/N 480-0028-00-00 5-16
Chapter 5: Configure via Command Line Interface (CLI)
unroutablelog
version
Description: Displays a list of calls that were not routed
Cmd Type: Command.
Prompt Level: Main Routing Server prompt.
Syntax: unroutablelog {help, c, s, r, l, o)
unroutablelog -h. Displays help.
unroutablelog -c. Clears the calls from the buffer.
unroutablelog -s{IP}. Identifies the call source endpoint IP address. Enter the
desired IP address.
unroutablelog -r{rec}. Displays specific record by record number. Enter a valid
record number.
unroutablelog -l{num}. Limits the number of displayed log entries.Valid entry:
1-5,000.
unroutablelog -o. Writes the screen data to a text file to the \log directory on
the server. You can FTP the file and use any applicable editor to review.
Availability: All Releases of Tenor Routing Server
Examples: Routing Server> unroutablelog - displays a list of calls that were not routed.
Description: Displays Routing Server Manager version, as well as the CLI version.
Cmd Type: Command.
Prompt Level: Main Routing Server prompt.
Syntax: version
Availability: All Releases of Tenor Routing Server
Examples: Routing Server> version - the version of the Routing Server Manager and the CLI ver-
sion will be listed.
Sample Display: CLI version : 1.0.0
RouteServer: 1.1.0