Teac GT-R1 - Manual (Page 16)

16 TASCAM GT-R1
q Wheel
When a setting screen is open, use the Wheel
to change the setting of the selected item.
When the Home Screen is open, use the wheel
to adjust the file playback position.
When the Rhythm Screen is open, use this to
set the tempo.
w STOP/HOME key
Press this key to stop recording and playback
or to end recording standby.
When a setting screen is open, press to return
to the Home Screen.
On a setting screen, use this key to respond
“NO” to a confirmation message.
e REC/PAUSE key
When playback is stopped, press this key to
put the unit into recording standby. When
in standby, this key flashes. If the Input
Setting Screen
MONITOR
item is ON, the
Overdubbing ON/OFF pop-up appears. (See
“7–Recording” on page 40.)
When in recording standby, press this key
to start recording. The key lights while
recording.
When recording, press this key to pause
recording.
When the Rhythm Screen is open this works
in the same way. Press this key to put the
rhythm machine into record standby, and
press it again in record standby to start
recording. (See “Record playing with a
rhythm” on page 87.)
r PEAK indicator
This lights when the selected input signal
exceeds the maximum level.
t Charge indicator
This indicator lights orange when the lithium
ion battery installed in this unit is charging.
The light turns OFF when the battery is fully
charged.
3–Part Names and Functions