Teac GT-R1 - Manual (Page 86)

86 TASCAM GT-R1
16–Using the Rhythm Machine
5) Adjust the input level
Use the
INPUT volume control on the right side
panel to adjust the input level.
If the PEAK indicator to the side of the display
lights, lower the input level.
If a mark remains at the right end of the L/R meter,
use the
INPUT volume control to lower the input
level, or lower the level of the effect with the
LVL
knob on the Effect Screen if you are using an
effect.
TIP
If you hear distortion when you plug in an •
active guitar or bass (one that contains an
internal battery), turn the volume down on
the instrument.
If the level is still too low even when the
•
INPUT volume is at the maximum when the
input source is set to INT/MIC and you are
using the built-in mic or the MIC IN input,
change the GAIN item to a higher setting on
the INT/MIC IN functions setting screen.
(See “Setting INT/MIC IN input functions” on
page 43.)
When the input source is set to LINE, use the
•
output volume control on the connected
device to adjust the level.