Teac GT-R1 - Manual (Page 77)

77 TASCAM GT-R1
15–Using the Tuner
The GT-R1 has a built-in tuner. By inputting the
sound of an instrument, you can use the tuning
meter on the display to tune that instrument
accurately. In addition, you can output a tone for
tuning from the
/LINE OUT jack to, for example,
tune multiple instruments simultaneously.
Preparation
1 Press the MENU key to open the Menu
Screen. Select the
TUNER
and press ¥/π .
2 Use the
MODE
item to select the tuner mode.
AUTO
Chromatic tuner mode
GUITAR
Guitar tuner mode
Bass
Bass tuner mode
OSC.
Oscillator mode
3 Use the
CALIB
item to set the frequency of
A above middle C (A4) between 435 Hz
and 445 Hz.
The set value appears in the lower right
part of the screen. This setting affects all
tuner modes.
Use of these tuner modes is explained below.
AUTO (chromatic tuner mode)
This is the default mode. Use the tuning meter on
the GT-R1’s screen to tune your instrument.
The tuning meter and input signal pitch appear on
the screen. (“
---
” appears when there is no input).
1 Set the input source that you are using. (See
“Selecting the input source” on page 42.)
2 Play the instrument you are tuning. The
name of the closest pitch appears in the
upper part of the meter.
3 Tune the instrument until the desired pitch