Teac GT-R1 - Manual (Page 49)

49 TASCAM GT-R1
About recording modes
In addition to ordinary recording of the input
signal, with this unit, you can mix and record the
input sound with an audio file that is playing back
in overdubbing.
Overdubbing OFF
Ordinary recording of the input signal occurs and
a new file is automatically created.
Overdubbing ON
When overdubbing is ON, you can play an audio
file saved on the SD card and mix in and record
a new sound. For example, you can sing along to
a karaoke track or play an instrument over a
backing track.
Even when overdubbing a new file is created
automatically. The audio file that is played back
is not overwritten.
TIP
By recording repeatedly in OVERDUB mode, you
can use the unit as a simple multitrack recorder
to overdub multiple parts.
Ordinary recording
Before starting the following operation procedures,
input selection and level adjustment should be
completed, and the Home Screen should be open.
1 Press
REC/PAUSE to begin recording
standby.
The screen shows the recording file name,
the input source, the recording audio
file type and sampling frequency. Please
confirm that these are as desired before
starting recording.
7–Recording