Teac GT-R1 - Manual (Page 89)

89 TASCAM GT-R1
16–Using the Rhythm Machine
Recording the count-in
Depending on the count-in and count recording
settings, the timing of the start of recording and
whether or not this count-in is recorded varies.
(See “Setting the rhythm machine” page 83.)
–
When
COUNT IN
is set to
–
, recording starts
after the count-in regardless of the
COUNT REC
setting.
–
When
COUNT REC
is
ON
and
COUNT IN
is
set to
+
, recording starts at beginning of the count-
in, and the count-in is also recorded.
–
When
COUNT REC
is
OFF
and
COUNT IN
is
set to
+
, recording starts at beginning of the count-
in, but the count-in is not recorded.
Apply effects to the rhythm
machine
You can apply reverb and other built-in effects to
the rhythm machine by setting the
SOURCE
on the
Effect Screen to
PLAY
. See “14–Using the Effects"
on page 74 for details about setting effects.
NOTE
When effects are applied to the rhythm •
machine, the effects are heard not only
during monitoring, they are also applied
when recording the rhythm machine.
Effects cannot be applied to both the rhythm
•
machine and the input signal and recorded.