Teac MX-2424 v1.04 User Manual
Page 43
401
Inputs 9 – 16 /48k
This Menu allows selection of input source for the second block of eight channels. Possible choices are:
Analog
When selected, input to tracks 9 – 16 is taken from inputs 9 – 16 of the analog I/O
module (IF-AN24) if installed.
Dig In
When selected, input to tracks 9 – 16 is taken from inputs 9 – 16 of a digital I/O module
(IF-AE24, IF-AD24 or IF-TD24) if installed.
2CH In
When selected, the stereo digital inputs are routed to channels 9 – 16 with the Left signal
going to the Odd tracks (9,11,13,15) and the Right signal going to the Even tracks
(10,12,14,16). It is then possible to record enable the desired Odd/Even pair of tracks for
stereo recording. (NOTE: When using this option it will be necessary to choose between
AES/EBU and SPDIF in Menu 462. and select 2CH In in Menu 002.)
Analog 1 – 8
When selected, input to tracks 9 – 16 is taken from inputs 1 – 8 of the analog I/O module
(IF-AN24) if installed. This is useful if the MX-2424 is connected to an analog mixer
with 8 busses.
Dig In 1 – 8
When selected, input to tracks 9 – 16 is taken from inputs 1 – 8 of a digital I/O module
(IF-AE24, IF-AD24 or IF-TD24) if installed. This is useful if the MX-2424 is connected
to a digital mixer with 8 busses.
402
Inputs 17 – 24 /48k
This Menu allows selection of input source for the third block of eight channels. Possible choices are:
Analog
When selected, input to tracks 17 – 24 is taken from inputs 17 – 24 of the analog I/O
module (IF-AN24) if installed.
Dig In
When selected, input to tracks 17 – 24 is taken from inputs 17 – 24 of a digital I/O
module (IF-AE24, IF-AD24 or IF-TD24) if installed.
2CH In
When selected, the stereo digital inputs are routed to channels 17 – 24 with the Left
signal going to the Odd tracks (17,19,21,23) and the Right signal going to the Even tracks
(18,20,22,24). It is then possible to record enable the desired Odd/Even pair of tracks for
stereo recording. (NOTE: When using this option it will be necessary to choose between
AES/EBU and SPDIF in Menu 462. and select 2CH In in Menu 002.)
Analog 1 – 8
When selected, input to tracks 17 – 24 is taken from inputs 1 – 8 of the analog I/O
module (IF-AN24) if installed. This is useful if the MX-2424 is connected to an analog
mixer with 8 busses.
Dig In 1 – 8
When selected, input to tracks 17 – 24 is taken from inputs 1 – 8 of a digital I/O module
(IF-AE24, IF-AD24 or IF-TD24) if installed. This is useful if the MX-2424 is connected
to a digital mixer with 8 busses.
451
Dig In Rate Conv
This Menu toggles On/Off the sample rate converter built into the 24-channel AES/EBU digital I/O module [52] if
installed. (NOTE: The TDIF and ADAT modules do not have sample rate conversion so this Menu will have no
effect when a TDIF or ADAT module is installed.)
461
2CH In Rate Conv
This Menu toggles On/Off the sample rate conversion process available on the stereo AES/EBU [55] and SPDIF
[54] digital inputs.
462
2CH In Source
This Menu selects either the AES/EBU [55] or SPDIF [54] input for transferring stereo audio into the MX-2424
digitally. (NOTE: When using input it may be necessary to enable sample rate conversion under Menu 461 and
select the appropriate Sample Reference under Menu 002.
43