Teac MX-2424 v1.04 - Manual (Page 45)

701 Rec Disk
The setting of this Menu determines the target disk for recording audio files. Only one target disk is possible at a
time for audio recording. Disks are represented by their SCSI ID numbers.
702 Rec Disk Status
This is a detailed display indication only of the format of the currently selected Record Disk. It is not possible to
make changes to any setting from this menu. The possible indications are:
Apple HFS
Unkown Format
703 Rec Disk Free
This is a dynamic display indication of approximate recording time left on the disk based on the number of tracks
selected for recording. It is updated as more tracks are record-enabled.
710 Disk Initialize
This Menu Utility will initialize the selected disk. This is a fast way to erase an entire disk. INITIALIZING A
DISK WILL ERASE ALL AUDIO ON THE DISK. THERE IS NO UNDO. Before a disk is initialized it must be
un-mounted.
The SCSI ID location of the disk to be initialized must first be chosen. Use TRIM [40] to select the correct disk:
Init Disk 0
Thru
Init Disk 6
Then the MX-2424 will prompt for confirmation.
The MX-2424 will initialize the disk to the Apple HFS disk format (Mac OS Standard). If it is necessary to mount
the disk on a Macintosh then the disk may be initialized on the Macintosh to Mac OS Standard before recording
audio on the MX-2424. If audio has been recorded on a disk with the MX-2424 and it is later determined that the
disk must be mounted on a Macintosh then Hard Disk Toolkit 3.0 must be used to install driver software on the
disk without affecting the recorded audio. It is necessary to restart the Macintosh to complete driver installation.
45