Teac MX-2424 v1.04 - Manual (Page 66)

ADAT OPTION
I/O Capacity: 3 Lightpipe I/O connector pairs. 8 In and 8 Out channels per connector set. 24 In / Out
channels total.
Quantization: 24 bits
Sample Rate: 38.5kHz to 54kHz – 24 I/O Channels, or at 96kHz – 12 I/O channels (future s/w)
Frequency Response: 20 Hz - 20 kHz +/- 0.0 dB
THD+N (through or record): Adds no distortion to source material.
MAIN UNIT
Sample length, Recording: 16-bit, linear or 24-bit, linear
Sample Length, Internal: 24 bit
Audio I/O: 1 AES/EBU (XLR M/F) and 1 SPDIF I/O (RCA F’s) connector set
Timing Reference sources: Internal, Internal Varispeed, Follow time code in, Video (either NTSC
or PAL), AES/EBU, SPDIF digital clock input, Word clock input, TL-Bus
Internal Sample Rates in Hz: 44056 (44100-), 44100, 44144 (44100+), 47952 (48000-), 48000,
48048, (48000+)
External Sample rates: 38.5 kHz - 96 kHz (via external sync input)
Time Code Type & Rate:
30 Non drop frame (NDF) @ 30 frames per second
30 Drop frame (DF) @ 30 frames per second
PAL @ 25 frames per second (PAL default setting)
NTSC @ 29.97 frames per second NDF (NTSC default setting)
29.97 Drop frame(DF) @ 29.97 frames per second
Nominal temperature should be 41 to 95 degrees Fahrenheit (5 to 35 degrees Centigrade).
Relative humidity should be 30 to 90% (non-condensing)
Size:17.5” D x 19” W x 7” H (44.45 Centimeters D x 48.26 Centimeters W x 17.78 Centimeters H)
Weight is approximately 31 Pounds (14 Kilograms) with option cards installed.
Electrical Ratings
Autoswitching power supply
100-240 V AC 1.5-0.8 A 150 W 50/60 Hz
Analog input/output is 9.75 VRMS Max
MX-2424 SYSTEM SPECIFICATIONS 6/15/00 Rev F
RC-2424 UNIT
Input Current Rating: 2A
Size: 8" D x 15" W x 2" H (38.1 Centimeters D x 20.32 Centimeters W x 5.08 Centimeters H)
Weight: 3.38 Pounds (1.5 Kilograms)
66