Verilink NCM 2000 (880-502623-001) Product Manual - Manual (Page 36)

Craft Interface
2 -12 Verilink NCM 2000
Figure 2-6 IMUX 2160 Diagnostics Menu
Performance and
Status
Performance and status functions are used to evaluate the
operation of application modules and the network facilities they
use. Modules which connect to network facilities such as E1, T1 or
T3 circuits will usually have statistics on circuit performance for
the preceeding 24 hours.
Performance and status for the NCM are not applicable, since the
NCM card does not connect to any customer equipment or circuits.
The performance information stored in each application module
module may be viewed by first selecting the module using the
shelf/slot command and then selecting P) performance/status.
[0.0.0.1] [1,13] IMUX 2160 > p
The Performance/Status Menu for an IMUX 2160 card is shown
below.
-- IMUX 2160 DIAGNOSTICS MENU -- -- IMUX 2160 DIAGNOSTICS MENU -- -- IMUX 2160 DIAGNOSTICS MENU -- -- IMUX 2160 DIAGNOSTICS MENU --
Data Port Type: HSSI Data Port Type: HSSI Data Port Type: HSSI Data Port Type: HSSI
DTR: YES
DTR: YES DTR: YES DTR: YES
Loop type A: NO
Loop type A: NO Loop type A: NO Loop type A: NO
Loop type B: NO
Loop type B: NO Loop type B: NO Loop type B: NO
AIS Pattern: DISABLE
AIS Pattern: DISABLE AIS Pattern: DISABLE AIS Pattern: DISABLE
Test Pattern: DISABLE
Test Pattern: DISABLE Test Pattern: DISABLE Test Pattern: DISABLE
Loopback: NONE
Loopback: NONE Loopback: NONE Loopback: NONE
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Lines Equipped: X X X X X X
Lines Equipped: X X X X X X Lines Equipped: X X X X X X Lines Equipped: X X X X X X
Lines Active: X X X X X X
Lines Active: X X X X X X Lines Active: X X X X X X Lines Active: X X X X X X
Frame Status: X X X X X X
Frame Status: X X X X X X Frame Status: X X X X X X Frame Status: X X X X X X
CTS Status: X X X X X X
CTS Status: X X X X X X CTS Status: X X X X X X CTS Status: X X X X X X
CRC Status:
CRC Status: CRC Status: CRC Status:
Far CRC Status:
Far CRC Status: Far CRC Status: Far CRC Status:
E) Equipment Loopback P) Payload Loopback
E) Equipment Loopback P) Payload Loopback E) Equipment Loopback P) Payload Loopback E) Equipment Loopback P) Payload Loopback
A) AIS Pattern X) main menu
A) AIS Pattern X) main menu A) AIS Pattern X) main menu A) AIS Pattern X) main menu
[0.0.0.90] [1,13] IMUX 2160 >
[0.0.0.90] [1,13] IMUX 2160 > [0.0.0.90] [1,13] IMUX 2160 > [0.0.0.90] [1,13] IMUX 2160 >