Verilink NCM 2000 (880-502623-001) Product Manual - Manual (Page 40)

Craft Interface
2 -16 Verilink NCM 2000
If a module other than the NCM is the currently selected module, an
Alarm Options Menu for that module will appear when Alarm is
selected from the Main Menu.
Circuit Manager Circuit Manager is used to create, edit and maintain connections
from one application module port to another application module
port. Without an NCM, individual application modules are only
able to make connections between ports on the same card.
The NCM adds the ability to build circuits from a port on one
application module to a port on another card.
Circuit Manager is covered in detail in Chapter 4, “Circuit
Manager” .
Manufacturing
Info
This submenu displays hardware revision level, date of
manufacture, serial number and part number information for the
currently selected card. The front application module appears
under the heading "Main Card" and the Connector Interface Module
in the rear is reported under the CIM column.
This information may be very useful if you need to contact Verilink
for assistance.
This screen is read-only to users of the equipment. The information
is set in the card at time of manufacture and updated as need be
when a card is factory upgraded.
NOTE: This information is not available for TABS modules in the node.
The following is an example of the information displayed.
Figure 2-10Manufacturing Information Report
Pressing E NTER returns you to the Main Menu.
MANUFACTURING INFORMATION MANUFACTURING INFORMATION MANUFACTURING INFORMATION MANUFACTURING INFORMATION
Main Card CIM
Main Card CIM Main Card CIM Main Card CIM
Revision RM) A RC) A
Revision RM) A RC) A Revision RM) A RC) A Revision RM) A RC) A
Date DM) 9/17/96 DC) 11/11/96
Date DM) 9/17/96 DC) 11/11/96 Date DM) 9/17/96 DC) 11/11/96 Date DM) 9/17/96 DC) 11/11/96
Serial number SM) 00534795 SC) 00643461
Serial number SM) 00534795 SC) 00643461 Serial number SM) 00534795 SC) 00643461 Serial number SM) 00534795 SC) 00643461
Manuf. Part No. MM) 319101697001 MC) 311101761001
Manuf. Part No. MM) 319101697001 MC) 311101761001 Manuf. Part No. MM) 319101697001 MC) 311101761001 Manuf. Part No. MM) 319101697001 MC) 311101761001
Cage Code CM) CC)
Cage Code CM) CC) Cage Code CM) CC) Cage Code CM) CC)
Type TM) NCM TC) NIM 2000
Type TM) NCM TC) NIM 2000 Type TM) NCM TC) NIM 2000 Type TM) NCM TC) NIM 2000
Press enter to continue Press enter to continue Press enter to continue Press enter to continue