Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 42)

Page 42 500 TA Option Configuration
These commands select the software version that the central office switch is
using when the network switch type is set for Northern Telecom DMS100
(AT!C0=1).
These commands select the software version that the central office switch is
using when the network switch type is set for National ISDN (AT!C0=2).
Voice SPID *!C6=
The voice SPID is provided to the user at subscription time. The voice SPID is
used to identify a particular service profile, or set of service or feature parame-
ters, with which an endpoint is to be associated.
The voice SPID can be a string with up to 20 characters. If the SPID is entered
on a command line with other commands, it should be isolated or set apart by
matching single or double quotation marks, for example '1234' or "1234". Quo-
tation marks are not required if the command is on a line by itself.
For Northern Telecom switches, the valid characters are any ASCII digit
except for the underline character (_). For National ISDN and AT&T switches,
only digits (0-9) are allowed.
Data SPID !C6=
The data SPID is provided to the user at subscription time. The data SPID is
used to identify a particular service profile, set of service or feature options,
with which an endpoint is to be associated.
The data SPID can be a string with up to 20 characters. If the SPID is entered
on a command line with other commands, it should be isolated or set apart by
matching single or double quotation marks, for example '1234' or "1234". Quo-
tation marks are not required if the command is on a line by itself.
Command Operation
!C1=0 AT&T Point-to-Point
!C1=1 AT&T Multi-Point (default)
Command Operation
!C1=2 DMS100 PVC IC-0
!C1=3 DMS100 PVC IC-1 (default)
Command Operation
!C1=4 National ISDN-1 (default)