Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 46)

Page 46 500 TA Option Configuration
Ring Count S1
This command is read only. It returns the current ring count, and is 0 if the
phone is not ringing. The count remains for 8 seconds after the last ring.
Wait for Connection S7
This command instructs the 500 TA how long it should wait for a connection.
If the connection is not complete within this amount of time a NO CARRIER
message is returned.
Speech Call Answer Option %A93
This command instructs the 500 TA as to whether to answer an incoming
speech Bearer Capability (BC) call.
3.1Khz Audio Call Answer Option %A94
This command instructs the 500 TA as to whether to answer an incoming
3.1Khz audio Bearer Capability (BC) call.
Data Call Answer Option %A95
This command instructs the 500 TA as to whether to answer an incoming data
Bearer Capability (BC) call.
Command Operation
S1? Display the ring count.
Command Operation
S7= Range: 0-255 default (30) Units = seconds
Command Operation
%A93=D Do not answer (default)
%A93=E Answer
Command Operation
%A94=D Do not answer (default)
%A94=E Answer
Command Operation
%A95=D Do not answer
%A95=E Answer (default)