Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 97)

Appendix C 500 TA Page 97
N None
<default>
O Odd
E Even
M Mark
Number of Data Bits Range: 7-8 default (8)
Number of Stop Bits 0 One <default>
1 One and One-Half
2 Two
Port Commands: Action
A Answer
D Dial S = n Dial Stored Number n
0-9,#,* Digits
;
Stay in command mode
P,T,W, and comma are ignored
H Hangup
In Information n = 0 Product ID ("960")
n = 1 ROM Checksum
n = 2 Checksum Verification
n = 3 Revision
("4574166-1E C34A PASS")
<board #>-<software>
<checksum> <PASS|FAIL>
n = 4 Capability String
O Return On-line
0, 1 Load Port from Quick Setup
factory profile n n = 0-3
&Tn Test Modes n = 0 End Test
n = 1 Local Loopback
n = 3 Digital Loopback
n = 8 Bilateral Loopback
n = 9 Local Terminal Loopback
&H Help Command
&H= Help for Individual Command Enter individual commands for which
help is desired.
AT&H=cmd[,cmd...]
&V View Port Parameters
&V= View Parameters E V.120 Parameters
Z Stored Telephone Numbers
CMD DESCRIPTION POSSIBLE VALUES