Dte parity @p3, Dte number of data bits @p4, Dte number of stop bits @p6 – Verilink Productivity 500 (34-00236) Product Manual User Manual
Page 49
Advertising
Option Configuration
500 TA
Page 49
DTE Parity
@P3
This command sets the DTE parity. The AT command processor, in most cases,
will detect the DTE speed and parity automatically.
DTE Number of Data Bits
@P4
This command sets the number of data bits the PC or terminal uses.
DTE Number of Stop Bits
@P6
This command sets the number of stop bits the PC or terminal uses.
800
4800 bps
600
9600 bps
9200
19200 bps
8400
38.4 kbps
8000
48 kbps
6000
56 kbps
7600
57.6 kbps
(default)
4000
64 kbps
12000
112 kbps
15200
115.2 kbps
(disables AutoBaud)
28000
128 kbps
Command
Operation
No Parity
(default)
Odd Parity
Even Parity
Mark Parity
Command
Operation
7 data bits
8 data bits
(default)
Command
Operation
One stop bit
(default)
One and one-half stop bits
Two stop bits
Advertising