Verilink Productivity 500 (34-00236) Product Manual - Manual (Page 99)

Appendix D 500 TA Page 99
Appendix D
Quick Setup Profiles
The following profiles can be loaded using the AT&Fn command where n is
the profile to be loaded.
Factory Profile #0 (Asynchronous V.120 Operation)(AT&F0)
AT COM OPTION SETTING AT COM OPTION SETTING
E1 Local Echo Enabled &S0 DSR Forced On
Q0 Status Message Enabled &D0 DTR Ignored
V1 Verbose Messages \Q3 RTS/CTS Flow Control
W0 Disable Protocol Messages &M0 Asynchronous Mode
X2 All Connect Messages &R1 CTS Forced (Synchronous)
S0=1 Autoanswer Enabled %A2=2 V.120 Protocol
S2=43 '+' Escape Character %A4=0 Line Channel Speed 64K
S3=13 Carriage Return Character %A93=D Do Not Answer Speech Call
S4=10 Line Feed Character %A94=D Do Not Answer Audio Call
S5=8 Backspace Character %A95=E Answer Data Call
S7=30 Wait For Connect
30 Seconds %A98=D Originate Call As Data
S10=14 Carrier Fail Detect Time
1.4 Seconds %D0 Disconnect Buffer Delay
0 Seconds
S12=50 +++ Escape Guard Time
1 Second
@P1=A AT Commands
S18=0 Test Exit Timer (Disabled) @P2= 115200 DTE Speed = 115.2 Kbps
S25=5 DTR Drop Response Time
0.5 Seconds @P3=N DTE Parity None
S26=1 RTS To CTS Delay Time
(Sync) 0.1 Second
@P4=8 DTE Data Bits 8
&C0 DCD Forced On @P6=0 DTE Stop Bit 1