Verilink Productivity 500 (34-00236) Product Manual User Manual
Page 63
Call Placement
500 TA
Page 63
Table 4
Normal Status and Connection Messages
Code #
Word Message
Meaning
0
OK
Command received OK.
1
CONNECT
Connection made at 0-300 bps; or at any speed
while X command in effect.
2
RING
Incoming ring detected.
3
NO CARRIER
Valid carrier not detected within period specified
by register S7, or carrier lost for 300 ms or more.
4
ERROR
Command not recognized or too long.
5
CONNECT 1200
Connection made at 1200 bps.
6
NO DIALTONE
ISDN Link is not synchronized
7
BUSY
Dialed number busy
10
CONNECT 2400
Connection made at 2400 bps.
11
CONNECT 4800
Connection made at 4800 bps.
12
CONNECT 9600
Connection made at 9600 bps.
14
CONNECT 19200
Connection made at 19200 bps.
28
CONNECT 38400
Connection made at 38400 bps.
32
CONNECT 48000
Connection made at 48000 bps
17
CONNECT 56000
Connection made at 56000 bps.
18
CONNECT 57600
Connection made at 57600 bps.
19
CONNECT 64000
Connection made at 64000 bps.
57
CARRIER 56000
ISDN Line Speed is 56000.
59
CARRIER 64000
ISDN Line Speed is 64000.
81
PROTOCOL: ISDN
Clear Channel Protocol.
83
PROTOCOL: V.120
V.120 Rate Adaption Protocol.
96
CHANNEL B1
Using Channel B1.
97
CHANNEL B2
Using Channel B2.