Verilink SCC 2020 (880-503268-001) Product Manual - Manual (Page 50)

Configuration
3-28 Verilink SCC 2020 User Manual
87 TAC 2130
DIU 2130
Canned configuration #7, assigns timeslots 1-23 to data port #1 and
timeslot 24 to data port #2 (data port #2 ignored by TAC 2130)
88 TAC 2130
DIU 2130
DIU 2131
Set DTE port(s) clock to TT , data port samples Transmit Data during
negative going transition of clock received from DTE (on the pair
Terminal Timing in RS-422, SCTE in V.35 or XTC in RS-232)
89 TAC 2130
DIU 2130
Set DTE port(s) clock to inverted ST (ST) data port samples Transmit
Data lead during positive going transition of transmit clock signal
90 TAC 2130
DIU 2130
Set DTE ports to n × 56 kbit/s (as required for an AMI T1)
91 TAC 2130
DIU 2130
Unassign Port 1 timeslot(s)
92 DIU 2130 Unassign Port 2 timeslot(s)
99 SCC 2020 Reset SCC password for Craft interface to default condition (no
password)
00 ALL Clear the address command, releases currently selected module. Use
this command if you change your mind after selecting a module in
step two, or if you select the wrong module accidentally, or to practice
double-clicking
Code Applies to Description