Vuzix Wrap 920AR - Manual (Page 65)

Boundary Check
In a virtual world without boundaries objects can become lost in the distance. By
applying boundaries those same objects are limited in how far afield they can move.
With Boundary Check selected, the scene’s boundary is determined by the minimum
and maximum X, Y, Z of the ”Cameras, Lights, Objects” locations.
No boundary is applied if this option is un-checked.
Separation
Note: Separation applies to VR Mode only (outward looking view).
3D or stereoscopic vision is based on the slight difference in viewing angle between
your left and right eye. In a virtual world, the camera is your eye and the Separation
value affects the separation between your left and right eye views.
The appropriate amount of separation is dependent upon the size of your virtual
world and the distance to objects being viewed.
The separation is offset by amount greater than that specified by the user settings in
the maxReality Viewer application.
Max Velocity
Note: Max Velocity applies to VR Mode only (outward looking view).
The Max Velocity is the maximum speed at which a camera can travel. Generally,
this would be set relative to the size and scale of your virtual world or the type of
Attached Object in your scene.
As an example, if your viewing perspective is that of a person you will want a slower
maximum velocity than if your virtual world was being viewed from the perspective
of a racecar driver or a spaceship.