H3C Technologies H3C S9500E Series Switches - Manual (Page 114)

104
Category Card model Description Applicable S9500E chassis
LSR1DPSP4L1
4-port OC-48c/STM-16c POS fiber
interface card
All S9500E models
LSR1DTCP8L1
8-port OC-3c/OC-12c POS fiber
interface card
All S9500E models
OAA cards
LSR1FW2A1 Firewall card All S9500E models
LSR1IPS1A1 1000 Mbps IPS card All S9500E models
LSR1WCM2A1 Wireless controller module All S9500E models
LSR1NSM1A1 NetStream card All S9500E models
LSR1LB1A1 Load balancing (LB) card All S9500E models
LSR1ACG1A1
Application control gateway (ACG)
card
All S9500E models
NOTE:
•
You must install the subcards to the base cards before installing them to your switch.
• The LSR1GP48LEF1 and LST1XP4LEF1 are supported by Release B1323 or above. The LSR1XP16REC1
is supported by Release B1331 or above.
For more information about the S9500E card LEDs, see "Appendix B LEDs."
For more information about the S9500E cards, see the corresponding datasheet of the cards.
MPUs
Table 33 MPU specifications
Item
Specifications
LSR1SRP2B
1
LSR1SRP2C1 LSR1SRP2B2 LSR1SRP2C2 LSR1SRP
2D1
CPU MPC8548
MPC8548+M
PC8544
MPC8548
MPC8548+MP
C8544
MPC8548
+MPC854
4
Applicable switches
S9508E
S9508E-V
S9512E S9508E
S9508E-V
S9512E
S9505E S9505E
All
S9500E
series
switches
Boot ROM 4 MB
Flash 128 MB
NVRAM 1 MB
SDRAM (DDR2) 1 GB (expandable to 2 GB)
CF card 256 MB (expandable to 512 MB or 1 GB)