H3C Technologies H3C S9500E Series Switches - Manual (Page 41)

31
Figure 25 Installing the front air filter
(1) Ventilation panel (2) Front air filter
Figure 26 Installing the rear air filter
(1) Ventilation panel (2) Rear air filter
Installing an air filter on other models of the S9500E switches
The air filters of the S9505E, S9508E, and S9512E are installed in the same way.
To install an air filter:
1. Unpack the air filter and fastening strips.
2. Align the screw holes on the fastening strip with the screw holes on the chassis, insert the screws
into the screw holes, and then fasten the screws with a screwdriver.
3. Push the air filter in between the fastening strips.
4. Fasten the captive screws.