H3C Technologies H3C S9500E Series Switches - Manual (Page 126)

116
LED Status Description
Off
The local Mate interface is not synchronous with the peer Mate
interface.
ACT/ALM
Steady red At least one alarm is present.
Steady green
The interface is up, and data is being transmitted and received
on the interface.
Off The interface is down.
PASSTHRU
Steady on The RPR station is in Passthru mode.
Off The RPR station is not in Passthru mode.
PROTECT
Flashing green The other RPR stations are in Steer state.
Steady green The local RPR station is in Steer state.
Flashing yellow The other RPR stations are in Wrap state.
Steady yellow The local RPR station is in Wrap state.
LSR1DPUP1L1/LSR1DPSP4L1/LSR1DTCP8L1
Table 52 LED description
LED Status Description
ACT/ALM
Steady red At least one alarm is present.
Steady green
The interface is up, and data is being transmitted and received
on the interface.
Off The interface is down.
LSR1DRSP2L1
Table 53 LED description
LED Status Description
PASSTHRU
(Ringlet 0) Steady on The RPR station is in Passthru mode.
Off The RPR station is not in Passthru mode.
PROTECT
(Ringlet 0)
Flashing green The other RPR stations are in Steer state.
Steady green The local RPR station is in Wrap state.
Flashing yellow The other RPR stations are in Wrap state.
Steady yellow The local RPR station is in Wrap state.
PASSTHRU
(Ringlet 1) Steady on The RPR station is in Passthru mode.
Off The RPR station is not in Passthru mode.
PROTECT
(Ringlet 1)
Flashing green The other RPR stations are in Steer state.
Steady green The local RPR station is in Steer state.
Flashing yellow The other RPR stations are in Wrap state.
Steady yellow The local RPR station is in Wrap state.