Replacing a fan tray for an s9508e-v – H3C Technologies H3C S9500E Series Switches User Manual
Page 93
83
2.
Holding the fan tray handle with one hand and supporting the fan tray bottom with the other hand,
pull out the fan tray along the slide rails. Put the removed fan tray on an antistatic mat or into its
original shipping materials.
3.
Gently insert the new fan tray into the fan tray slot along the slide rails until it has close contact with
the backplane.
4.
Use a Phillips screwdriver to fasten the captive screws on both sides of the fan tray panel.
Figure 63 Removing a fan tray for an S9505E
Replacing a fan tray for an S9508E-V
The fan tray of an S9508E-V is horizontally installed.
To replace a fan tray for an S9508E-V:
1.
Use your thumb to press the fan tray button, and pull the fan tray part-way out.
2.
Holding both sides of the fan tray, pull out the fan tray along the slide rails. Put the removed fan
tray on an antistatic mat or into its original shipping materials.
3.
Insert a new fan tray into the fan tray slot along the slide rails until it has close contact with the
backplane.