H3C Technologies H3C S9500E Series Switches - Manual (Page 116)

106
Model Interface type and number Supported interface modules
LSR1XP16REC1 Sixteen 10-GE SFP+ fiber ports
• 10-GE SFP+ module
• 10-GE SFP+ cable
NOTE:
Each combo interface comprises a copper port and a fiber port. The two ports cannot work at the same
time.
Base cards
A base card provides external interfaces and supports relevant software configurations only after a
subcard is installed to it.
Table 35 Base card specifications
Model Number of subcard slots Supported subcards
LSR1LN1BNL1 1
• LSR1DRUP1L1
• LSR1DPUP1L1
• LSR1DPSP4L1
• LSR1DRSP2L1
• LSR1DTCP8L1
LSR1LN2BNL1 2
Subcards
You can install the following subcards to the base card LSR1LN1BNL1 or LSR1LN2BNL1.
Table 36 Subcard specifications
Model Interface type and number Connector
Interface
transmission
rate
Supported transceiver
modules
LSR1DPUP1L1
One OC-192c/STM-64c POS
fiber port
XFP/LC 9953.28 Mbps 10G XFP module
LSR1DRUP1L1
One OC-192c/STM-64c RPR
fiber port
One mate copper port
XFP/LC 9953.28 Mbps 10G XFP module
LSR1DRSP2L1
Two OC-48c/STM-16c RPR
fiber ports
Two OC-48c/STM-16c SFP
mate fiber ports
SFP/LC 2488.32 Mbps 2.5G SFP module
LSR1DPSP4L1
Four OC-48c/STM-16c POS
fiber ports
SFP/LC 2488.32 Mbps 2.5G SFP module
LSR1DTCP8L1
Eight OC-3c/OC-12c
POS/GE fiber ports
SFP/LC
155.52 Mbps
622.08 Mbps 155M POS SFP module
622M POS SFP module