HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 155)

Error messages 4.7
4
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
155
Detailed error messages
The TNC displays possible causes of the error and suggestions for
solving the problem:
Open the error window
Information on the error cause and corrective
action: Position the highlight on the error message
and press the soft key. The TNC opens a window
with information on the error cause and corrective
action.
Leave Info: Press the soft key again
INTERNAL INFO soft key
The INTERNAL INFO soft key supplies information on the error
message. This information is only required if servicing is needed.
Open the error window.
Detailed information about the error message:
Position the highlight on the error message and
press the
INTERNAL INFO soft key. The TNC
opens a window with internal information about
the error
To exit Details, press the
INTERNAL INFO soft key
again.