HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 449)

Pallet management 13.1
13
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
449
Screen layout for executing pallet tables
You can have the TNC display the program contents and pallet file
contents on the screen together by selecting the screen layout
PROGRAM + PALLET. During execution, the TNC then shows
program blocks to the left and the pallet to the right. To check the
program contents before execution, proceed as follows:
Select a pallet table
With the arrow keys, choose the program you would like to
check
Press the
OPEN PGM soft key: the TNC displays the selected
program on the screen. You can now page through the program
with the arrow keys
To return to the pallet table: Press the
OPEN PROGRAM soft key
again