D29 – transfer values to the plc, D37 – export, Additional functions 9.8 – HEIDENHAIN TNC 640 (34059x-05) ISO programming User Manual

Page 323

Advertising
background image

Additional functions

9.8

9

TNC 640 | User's ManualDIN/ISO Programming | 1/2015

323

D29 – Transfer values to the PLC

This function may only be used with the permission

of your machine tool builder.

The

D29 function transfers up to eight numerical values or Q

parameters to the PLC.

D37 – EXPORT

This function may only be used with the permission

of your machine tool builder.

You need the

D37 function if you want to create your own cycles

and integrate them in the TNC.

Advertising
See also other documents in the category HEIDENHAIN Equipment: