HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 428)

Programming: Multiple Axis Machining
12.2 The PLANE Function: Tilting the working plane (Software Option 8)
12
428
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
Input parameters
Axis angle A?: Axis angle to which the A axis
is to be tilted. If entered incrementally, it is the
angle
by which
the A axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
to which
the B axis
is to be tilted. If entered incrementally, it is the
angle by which the B axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
to which the C axis
is to be tilted. If entered incrementally, it is the
angle by which the C axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties, see
"Specifying the positioning behavior of the PLANE
function", page 429
Abbreviations used
Abbreviation Meaning
AXIAL In the axial direction
NC block
N50 PLANE AXIAL B-45 .....*