HEIDENHAIN TNC 640 (34059x-05) ISO programming User Manual

Page 391

Advertising

Adaptive feed control AFC (Option #45)

11.3

TNC 640 | User's ManualDIN/ISO Programming | 1/2015

391

Proceed as follows to select and, if required, edit the

<name>.I.AFC.DEP file:

Select the

Program Run, Full Sequence operating

mode
Shift the soft-key row

Select the table of AFC settings
Make optimizations if required

Note that the

<name>.I.AFC.DEP file is locked

against editing as long as the NC program

<name>.I

is running.
The TNC removes the editing lock if one of the

following functions has been executed:

M02
M30
N99999999

You can also change the

<name>.I.AFC.DEP file in the

Programming mode of operation. If necessary, you can even delete

a machining step (entire line) there.

In order to edit the

<name>.I.AFC.DEP file, you must

first set the file manager so that all file types can be
displayed (

SELECT TYPE soft key) Also see: "Files",

Advertising