HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 18)

Fundamentals
TNC model, software and features
18
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
New and modified cycle functions 34059x-05
New cycle G880 (Option #50), see "ZAHNRAD ABWÄLZFRÄSEN
(Zyklus 880, DIN/ISO: G880)"
New cycle
G292 (Option #96), see "INTERPOLATIONSDREHEN
KONTURSCHLICHTEN (Zyklus 292, DIN/ISO: G292, Softwareoption
96)"
New cycle
G291 COUPLG.TURNG.INTERP. (Option #96), see
"INTERPOLATIONSDREHEN KOPPLUNG (Zyklus 291, DIN/ISO:
G291, Softwareoption 96)"
New cycle
G239 for LAC (Load Adapt. Control) load-dependent
adaptation of control parameters (Option #143), see "BELADUNG
ERMITTELN (Zyklus 239 DIN/ISO: G239, Software-Option 143)"
Cycle
G270 CONTOUR TRAIN DATA has been added (Option #19),
see "KONTURZUG-DATEN (Zyklus 270, DIN/ISO: G270, Software-
Option 19)"
Cycle
G139 has been added (Option #1), see "ZYLINDER-MANTEL
(Zyklus 39, DIN/ISO: G139, Software-Option 1)"
The character set of machining cycle
G225 has been expanded
with the CE character, ß, the @ character and system time, see
"ENGRAVING (Cycle 225, DIN/ISO: G225)"
Cycles
G252-G254 have been expanded with the optional
parameter Q439
Cycle
G122 has been expanded with the optional parameters
Q401, Q404, see "ROUGHING (Cycle 22, DIN/ISO: G122, software
option 19)"
Cycle
G484 has been expanded with the optional parameter Q536,
see "Calibrate the wireless TT 449 (Cycle 484, DIN/ISO: G484,
software option 17 Touch Probe Functions software option 17)"
Cycles
G841 SIMPLE REC. TURNG., RADIAL DIR., G842 , G851 ,
G852 have been expanded with plunge feed rate Q488
Eccentric turning with cycle
G800 is possible with Option #50,
see "ADAPT ROTARY COORDINATE SYSTEM(Cycle 800, DIN/ISO:
G800)"