HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 461)

Tools in turning mode (Option #50) 14.4
14
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
461
14.4 Tools in turning mode (Option #50)
Tool call
Just as in Milling mode, turning tools are called with the T function.
You merely have to enter the tool number or tool name in the T
block.
You can call and insert a turning tool both in Milling
mode and in Turning mode.
Tool selection in the pop-up window
If you open a pop-up window for tool selection, the TNC marks all
tools available in the tool magazine green.
In addition to the tool number and tool name, the control also
shows the
ZL and XL columns from the turning tool table.
NC syntax
N40 FUNCTION MODE TURN Turning mode selection
N50 T301 Tool call