HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 414)

Programming: Multiple Axis Machining
12.2 The PLANE Function: Tilting the working plane (Software Option 8)
12
414
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
Overview
All PLANE functions available on the TNC describe the desired
working plane independently of the rotary axes actually present on
your machine. The following possibilities are available:
Soft key Function Required parameters Page
SPATIAL Three spatial angles:
SPA, SPB, and SPC
417
PROJECTED Two projection angles:
PROPR and PROMIN
and a rotation angle
ROT
419
EULER Three Euler angles:
precession (
EULPR),
nutation ( EULNU) and
rotation ( EULROT),
420
VECTOR Normal vector for
defining the plane and
base vector for defining
the direction of the
tilted X axis
422
POINTS Coordinates of any
three points in the
plane to be tilted
424
RELATIVE Single, incrementally
effective spatial angle
426
AXIAL Up to three absolute or
incremental axis angles
A,B,C
427
RESET Resetting the PLANE
function
416