HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 179)

Tool data 5.2
5
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
179
Soft key Editing functions for tool tables
Show all drills in the tool table
Show all cutters in the tool table
Show all taps/thread cutters in the tool table
Show all touch probes in the tool table
Exiting any other tool table
Call the file manager and select a file of a different type, such as
a part program
Tool table for turning tools
With the management of turning tools, other geometric
descriptions are considered than with milling or drilling tools. To be
able to execute tool radius compensation, for example, you have
to define the tool radius. To support these definitions, the TNC
provides a special tool management for turning tools, see "Tool
data", page 463.