Yaskawa Portable Control Display Unit - Manual (Page 32)

5 FAULT MENU
26 The Error Disposition List
01/22/96
How to Select the
Error Code to View
and/or Change Its
Disposition
entered since power-up or reset, the PCDU
will display:
The top line is the description of the error.
The bottom left of the display shows the
error code number (013). The rest of the
display indicates which list(s) will record
error 013. In this example, it would be
placed in the Error List and the Fault List,
since the words “Error” and “Fault” both
appear on the bottom line.
• Select Function # 801 and access the
Disposition List (see page 25).
• Follow examples below.
Example 1) illustrates the steps to follow
when the error code number is known.
Example 2) shows steps when error code
number is not known.
1) Example:
It is desired to change the disposition for a
Math Underflow error. It will be assumed
for this example that this error has a code
number of 102.
• Key in the corresponding error code
(102).
The PCDU will display:
Enter the error
Code Number : 102
BAD INSTRUCTION
#013 Error Fault