Yaskawa Portable Control Display Unit - Manual (Page 51)

6 TEST MENU
45 Self-Tune
01/22/96
Power Conversion Unit detects
significant motor voltage during
the test, the Power Conversion
Unit Parameter Measurement
function will abort.
The Power Conversion Unit Parameter
Measurement function can be selected in
one of two ways:
1. Scrolling
• Press the TST key, then repeatedly
press the INC or DEC key until the
PCDU displays:
This display shows the description of
function # 997 on the top line. The bottom
line displays a prompt to press the ENT
key as well as the function number
currently being used. The “T” preceding
the “997” indicates that this function code
is part of the TEST menu.
• Press the ENT key.
OR
2. Direct Access
• Enter the appropriate function
number (# 997) from the top level of
any menu display. The display
changes to:
Enter Function
Number : 997
PCU SELF-TUNE
(Press ENT) T997