Yaskawa Portable Control Display Unit - Manual (Page 38)

6 TEST MENU
32 Trace Monitor Function
01/22/96
At this point the operator may press one of
three keys.
• Press the DEC key to view the PAC
block in the previous Trace Buffer.
The PCDU will wrap back to Trace
Buffer # 3 if Trace Buffer # 0 is
currently in the display. The PCDU
will display:
• Press the INC key to view the PAC
block in the next Trace Buffer. The
PCDU will wrap forward to the
Trace Buffer # 0 if Trace Buffer # 3
is currently in the display.
• Press the ENT key. The PCDU
prepares to edit the Trace Buffer
currently in the display (top line of
display flashes). The new PAC
Block must be entered at this point.
An example of this display is:
If the PAC block number in the brackets is
the same as the PAC block to be placed in
the Trace Buffer, press the ENT key.
If 0000 is entered as a PAC block, that
Trace Buffer will be cleared. The PCDU
will display:
Trace Buffer CLR
(Press ESC)
Trace Buffer #0
Blk [00101]
Trace Buffer #3
Empty (Press ENT)