Yaskawa Portable Control Display Unit - Manual (Page 33)

5 FAULT MENU
27 The Error Disposition List
01/22/96
• Press the ENT key to select the error
code. The PCDU will display the
current disposition for a Math
Underflow error:
Note that the top line of the display is solid
to indicate that the current disposition of
the error is now being displayed.
⇒
• Press the ENT key to modify the
disposition of the error currently
being displayed. The top line will
flash to indicate that changes are to
be made to the disposition of this
error.
There are four combinations of disposition
available for each error. These are: No
Error/No Fault, No Error/Yes Fault, Yes
Error/No Fault, and Yes Error/Yes Fault.
The INC and DEC keys are used to select
which combination will be used. The
error will not be reported to either list if
there is a No Error/No Fault display:
• Press the INC and/or DEC key until
the desired disposition is shown in
the display. For this example the
Math Underflow error should be
reported to the Error List and not to
the Fault List. The following
display should be obtained:
Math Underflow
#102 Error
Math Underflow
#102
Math Underflow
#102 Error Fault