Yaskawa Portable Control Display Unit - Manual (Page 49)

8 TEST MENU
43 Loading Defaults
01/22/96
• If the NVRAM PROTECTION
switch is in the “OFF” position, the
PCDU displays the following
success message:
• If the NVRAM PROTECTION
switch is in the “ON” position, the
PCDU displays the following error
message:
• In this case, move the NVRAM
PROTECTION switch to the “OFF”
position.
• Press the ESC key. Start again from
this display:
LOAD DEFAULTS
(Press ENT) T995
NVRAM protected
press ESC key.
Defaults loaded
press ESC key.